Wizard Elite IP
TECHNICAL INFO
All technical info regarding Elite IP on this page: downloads | dimensions | extensions.
DIMENSIONS:
SMALL MODEL
Height: 264 mm | Width: 155 mm
Recess to be provided recessed model:
Height: 245 mm | Width: 135 mm | Depth: 62 mm
BIG MODEL
Height: 348 mm | Width: 155 mm
Recess to be provided recessed model:
Height: 332 mm | Width: 135 mm | Depth: 62 mm
A 143mm-wide frame is also available for each model (FT25SF).
EXTENSIONS:
2 WIRE INVERTER
Do you need to connect an IP videophone, IP camera, computer,… or whatever else to the network and you don’t have the right network cabling? Our new two-wire inverter FTPOE2W offers the solution!
This module transforms any two-wire or coax connection into the perfect cat5 network cable. You don’t even have to power the transmitter if you have a PoE switch. The PoE is transported together with the data over the old cabling.
You can connect as many pairs to your network as you wish: the modules will not interfere with each other or others and the IP addresses are assigned fully automatically.The distance that can be bridged is a maximum of 500 meters. The module can therefore also be used if you have cat 5 lying around but need to go further than the traditionally permitted 90 meters.
FT25HS:
This set of fittings is very useful when the Wizard Elite needs to be built into a hollow wall or column.
FT25SF:
FTFRAME:
Presentation frame in the same size and finish as the Wizard Elite IP.
NEW: INTEGRATION WITH TEAMS
As enterprises migrate their traditional telephony from a local IP-PBX or cloud telephony platform to Microsoft Teams, they need a solution to allow their (existing) SIP (video) door entry system to communicate with Teams.
Through CyberGate, you can connect any Wizard IP to Microsoft Teams. Teams users answer incoming calls with 2-way audio and live video on their Teams desktop client, Teams-compatible desk phone and Teams Smartphone app and open the door for visitors. With CyberGate, no Session Border Controller (SBC) is required.
For all info: https://www.cybertwice.com/cybergate.html
RAIN AND WIND CANOPY
FT25BUS-RS for small model Elite
FT25BUL-RS for large model Elite
FT25HV
The Wizard Elite is finished with an aluminium frame that effortlessly stands the test of time. However, integrating the Wizard into a rear unit so that its glass plate is flush with the rest remains the ultimate.
This piece of customisation is now greatly facilitated with the new attachment FT25HV. Make the recess for the glass, micro and loudspeaker and stick the FT25HV 1 cm from the inside edges. The entire doorphone is then secured in its entirety with nuts. So simple, but the result is a beautifully sleek whole!
FT4SWIP
This Input/Output module greatly expands the capabilities of the Wizard and indoor VISITOR!
you can use your telephone and/or optional keypad to create 4 additional controls.
The FT4SWIP is therefore necessary when you need to be able to control several ports independently. This module
also increases security: after all, the relays are inside.
Through its inputs, this module shows the status of multiple ports (open/on) on both the
VISITOR! and our app.
Maximum 2 modules per Wizard.
FT25SPLIC OPTIONAL SPEECH MODULE
Speech module that allows you to welcome your visitor with a spoken message.
A message can be played at 4 moments:
- when ringing the doorbell
- when opening the door
- at the end of a call
- when entering the correct/erroneous code on the access keypad.
This module is a licence and can therefore be activated during or after the purchase of the Wizard.
FTPROXILIC INTEGRATED PROXIMITY MODULE WITH ASSOCIATED CARDS AND KEY RINGS FTPROXIK + FTPROXIS
The FTPROXILIC can be used in 2 ways:
1. The module activates an internal relay of the Wizard or a web relay of the FT4SWIP.
Only a limited record is kept in the log files.
2. The module is linked via the Wiegand protocol to an external controller of an access control supplier, enabling all kinds of recordings, reports and controls.
This module is licensed and can therefore be activated at any time.